top of page

Still Spirits Create+ Straight Section

$89.95Price

The Create+ Straight Section is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel Straight Section extends the column for enhanced reflux or integrates into a modular distilling system.

Quantity
  • Features

    • Connects to 2" tri-clamp distilling accessories
    • 304 grade sainless steel construction
    • High temperature resistent food grade silicone
  • Includes

    • Straight Section
    • 2" Tri-clamp
    • 2" Silicone Gasket
  • Specifications

    • Dimenions: H 30.0 cm x W 5.1 cm x D 5.1 cm
    • Weight: 0.583 kg
    • NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:

    • A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
    • A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
    • We recommend external support if:

    • Your column & condenser exceeds the above specifications.
    • The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
    • If the column & condenser is noticeably leaning.
  • How to Use

    Insert Straight Section into your distilling system ensuring the silicone gasket is placed in the tri-clamp connection. Secure with a tri-clamp.

    CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run.

    CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris.

    CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling.

    For use as a sight glass: Attach the sight glass to your distilling system (mesh filters are not required).

     

    Cleaning: Clean with warm water and a suitable brewery cleaner. Using a pipe brush, clean away all residual oils on the glass. Disassembly should only be required if heavy soiling around the silicone components exists. Sanitation is not needed in this application.

Related Products

bottom of page